Rock netting cost depends on mesh size, wire diameter, coating, and roll format. Our Rockfall Protective Net uses continuous triple-twisted mesh, four mesh options, several wire combinations, and roll lengths from 20 to 120 m. Fix the specification against the rock face and curtain dimensions before requesting a quote.
Rock netting cost is easier to assess after the specification is fixed. Our Rockfall Protective Net uses a continuous roll of triple-twisted mesh. The configuration can be matched to the rock face and curtain dimensions before you request a quote.
The purchasing decision has four parts: the opening required for the supported rock, the wire construction, the coating, and the roll format. State each one in the inquiry so the quoted material matches the configuration under consideration.
Mesh size is the first fit check because the opening should suit the type of rock being supported. We supply the Rockfall Protective Net in four mesh sizes:
| Mesh size | Roll length | Roll width |
|---|---|---|
| 60x80 mm | 20 to 100 m | 1 to 4 m |
| 80x100 mm | 20 to 120 m | 1 to 4 m |
| 100x120 mm | 20 to 120 m | 1 to 4 m |
| 120x150 mm | 20 to 120 m | 1 to 4 m |
The 60x80 mm option provides the smallest listed opening. The 80x100 mm, 100x120 mm, and 120x150 mm options provide progressively larger openings. Match the selection to the type of rock being supported and the slope requirement.
Mesh size also changes the roll-length options. The 60x80 mm mesh is available in lengths from 20 to 100 m, while the other three mesh sizes are available in lengths from 20 to 120 m. All four options have a roll width from 1 to 4 m. Check the curtain dimensions against these ranges before comparing quotations.
Wire diameter and coating are separate parts of the specification. Our netting uses heavily galvanized or Galfan coated wire in diameters of 2.00, 2.20, 2.40, 2.70, and 3.00. PVC coated versions use heavily galvanized or Galfan coated wire in these combinations: 2.0/3.0, 2.2/3.2, 2.4/3.4, 2.7/3.7, and 2.0/4.0.
Select the wire combination after considering the type of rock being supported, the required punching stress resistance, and the coating required for the project. Two nets with the same mesh size can still have different quote specifications when their wire construction differs.
Write the coating and diameter together in the inquiry. Specify heavily galvanized wire, Galfan coated wire, or a PVC coated option on heavily galvanized or Galfan coated wire, then identify the applicable diameter or paired sizes. This keeps the quotation aligned with the intended netting construction.
Roll length and width set the material format for the curtain. The available roll width is 1 to 4 m. Roll length is 20 to 100 m for 60x80 mm mesh and 20 to 120 m for 80x100 mm, 100x120 mm, and 120x150 mm mesh.
Individual rolls are wired together to form a curtain. The triple-twisted mesh provides continuity at the joints without the need to overlap mesh panels. For a useful cost comparison, keep the selected mesh and wire configuration consistent between quotations, then compare rolls with the same dimensions.
A longer or wider roll represents a different material quantity from a shorter or narrower roll, even when the mesh size is the same. State the intended dimensions with the mesh and wire selection so the requested configuration can be priced on the same basis.
Triple-twisted mesh is the defining construction of this netting. If one mesh wire breaks, the mesh does not unravel. The product also has high tension and punching stress resistance.
The netting forms a curtain to control the fall of loose rock and to encourage stability of the rock face by promoting vegetation. It suits a slope protection requirement that calls for continuous mesh, provided the selected mesh opening and wire combination fit the type of rock being supported.
This makes the product appropriate for buyers who need loose-rock control across a rock face and who can define the curtain dimensions. Choose the mesh opening first, then fix the wire and coating details before using the roll format to compare rock netting cost.
Our advice
Choose this netting for a continuous curtain over a rock face. Match the mesh opening to the supported rock, state the wire and coating construction, and select roll dimensions within the applicable ranges. It suits buyers defining a net configuration before comparing rock netting cost and requesting a quote.
What to weigh
Your shortlist
Choose 60x80 mm, 80x100 mm, 100x120 mm, or 120x150 mm according to the type of rock being supported and the required opening. The 60x80 mm option has a 20 to 100 m length range; the other three options have a 20 to 120 m length range. Every listed mesh size has a 1 to 4 m roll width.
Heavily galvanized or Galfan coated wire is supplied in 2.00, 2.20, 2.40, 2.70, and 3.00. PVC coated versions use 2.0/3.0, 2.2/3.2, 2.4/3.4, 2.7/3.7, and 2.0/4.0. Include the coating type with the diameter because the paired sizes identify the PVC coated construction.
Yes. Individual rolls are wired together to form a curtain. The triple-twisted mesh provides continuity at the joints without the need to overlap mesh panels. Include the selected mesh size, wire construction, and roll dimensions in the inquiry so the curtain material corresponds to the rock face requirement.
Our Rockfall Protective Net suits projects that need continuous triple-twisted mesh for loose-rock control and rock-face stability. Choose the opening for the supported rock, identify the wire and coating, then select a roll length and width within the applicable range. For a quote, send the curtain dimensions and the exact net configuration to be priced.
The company
is located in Anping County, Hengshui City, Hebei Province, is a professional production of metal products industry and trade integrated enterprises. Is a set of research and development, production, sales in one. With the expansion of production scale, it has become a metal products company based on the production of galvanized wire products, gabion mesh, and barrel handles.…
About Us ↗Visit company website ↗